1、Substrate Preparation: Remove dust, oil contaminants and loose rust from the roof substrate to ensure a clean base.

2、The multi-functional reflective thermal-insulating coating shall be thoroughly mixed with a mixer before spraying. Normally, one minute of mixing with a hand-held mixer is sufficient.

3、 Application is carried out by spraying. A conventional coating spray gun may be used with a spraying pressure of0.4~0.5 MPa and a coating thickness below 1 mm. A paint spray gun with a 1.5 mm nozzle orifice can also be adopted, with spraying pressure set at 0.4-0.5 MPa and coating thickness kept below 1 mm. lf the viscosity is low for easy spraying, proper amount of water may be added for dilution.

4、At a coating thickness of 0.2 mm, the drying time is 2-3 hours under sunlight. Drying takes 4-6 hours in shaded areas or at lower temperatures. Construction is recommended to be suspended when the outdoor temperature is below 5'c, and no work shall be carried out in rainy weather.

5、This product must be hermetically stored in a well-ventilated, dry indoor environment and protected from prolonged sunlight exposure. Keep the material sealed at all times, use it promptly once opened The shelf life is 36 months under proper sealed storage conditions.